Contact Us

Let’s Get in Touch
Application Data

For Details of Fits, refer to the table, “Coupling Bore Clearances.

For Vertical Mount, the upper bearing of the Driven Equipment must be independently supported.

Product
Complete Coupling Data

Choose the appropriate data sheet based on your application. If one or both of the shafts are Tapered, choose Tapered Shafts.

Coupling Data Sheet A

Coupling Data Sheet B

Cylindrical Shafts
Cylindrical Shafts

Fill in the below shaft detail fields based on your equipment configuration. If one of the shafts is cylindrical, fill in the below fields for either the driver or driven shaft.

For the tapered shaft details, check the appropriate boxes on the following pages for your tapered shaft type and fill in the data fields for the driver and driven shaft sections that apply.

The fields outlined in green are required for all configurations.

Driver
Tapered shaft details
Usually 1/8” to 1/4” depending on Shaft size and Taper.
Specify whether Keyway is parallel to taper or shaft centerline.
Specify Depth at larger diameter of taper if Keyway is parallel to shaft centerline.
Driven
Tapered shaft details
Usually 1/8” to 1/4” depending on Shaft size and Taper.
Specify whether Keyway is parallel to taper or shaft centerline.
Specify Depth at larger diameter of taper if Keyway is parallel to shaft centerline.
Review & Submit
Contact Info
Application Data
Cylindrical Shafts
Thank you!

Your form has been submitted successfully.

Go to the homepage